Filter
Top Products
O
THER
W
AYS
TO
FAX
5.3
5
Delayed Sending
You can set your machine to send a fax at a later time when you
will not be present.
1
Load the document you want to send in the Duplex
Automatic Document Feeder (DADF) or on the scan glass.
See “Loading Document(s) for Faxing” on page 2.3.
2
Make sure that the machine is in the fax idle mode. If
necessary, press
Fax
to enter the fax idle mode.
3
You can use
Resolution
,
Original Type
,
Darkness
and/or
Duplex
to choose the appropriate sending condition for the
document. For details, see “Adjusting the Document
Settings” on page 2.6.
4
Press
Menu
until “Fax Features” displays on the top line.
5
“Delayed Fax” appears on the bottom line and then press
Enter
.
6
Enter the number of the remote fax machine using the
number keypad and then press
Enter
.
Or, press
Phonebook
and enter the speed dial number or
one-touch dial number.
7
The display asks if you want to enter another number. To
enter another number, select “Yes” and repeat step 6. To
send to one location or when you finish entering numbers,
select “No.”
8
Enter a name for the job and then press
Enter
. You may
skip this step.
9
The display shows the current time and asks you to enter
the start time when the fax is to be sent.
10
Enter the time by using the number keypad.
To select AM or PM for 12-hour format, press the Sharp
key( ). If you set a time earlier than the current time, the
document will be sent at that time on the following day.