Filter
Top Products
C
OPYING
4.7
4
3
To enter Darkness mode, press
Darkness
. You can see the
current setting on the bottom line of the display and the
corresponding green LED is lighted.
4
Press
Darkness
or the scroll buttons until the
corresponding green LED of the desire mode lights. You can
choose from:
Light
: works well with dark print.
Normal
: works well with standard typed or printed
documents.
Dark
: works well with light print or faint pencil markings.
5
If necessary, you can use various copy features, such as
Book Copy, Auto Fit. See “Using Copy Menu Features” on
page 4.11 and “Using Special Copying Features” on
page 4.16.
6
Press
Start
to begin copying.
Adjusting the Copy Size
Using
Reduce/Enlarge
, you can reduce or enlarge the size of
a copied image by 25% to 400% when you copy the original
from the document scanner glass, and by 25% to 100% using
the DADF. Note that the zoom rate available is different
according to the document loading method.
1
Load the documents to be copied in the DADF.
Or, place a sheet of the documents on the document glass
face down.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
Press
Reduce/Enlarge
. Enter the size using the number
keypad or press
Reduce/Enlarge
or the scroll buttons.
4
Press
Enter
to save the selection.
You can see the current size in the left bottom corner of the
display.