Filter
Top Products
4-21
Wipe Operations
6. If entering a transition rate for an M/E, the display queries:
KEY 1 RATE = ?
7. Use the E-MEM numeric keypad to enter the number of
television frames for the KEY 1 transition rate. Enter a rate
from 0 – 999. The display queries:
KEY 2 RATE = ?
8. Use the E-MEM numeric keypad to enter the number of
television frames for the KEY 2 transition rate. Enter a rate
from 0 – 999.
9. To display the current Key Rates, select KEY 1/KEY 2/ DSK 1/
DSK 2
on the Transition Subpanel, then press SHOW KEY on
the Keyer/DSK Keyer
10. If you decide not to learn a transition, you can cancel it by
pressing the transition button again. Or press ENTER with no
entry to select the next rate.