Filter
Top Products
2-3
Software Setup
To begin the setup process, press the CONFG button on the Menu
Display Subpanel to display the Configuration Menu and the sub-
menu choices.
1. USER PREFS > — Set up operating parameters, such as Keyer
and Preview preferences and default switcher states.
2. SYSTEM PARAMS > — Set aspect ratio, the matte generator limiter
and the system clock.
3. INPUTS > — Define your inputs and name crosspoint buttons.
4. OUTPUTS > — Adjust the luminance and chroma limiter
settings on the switcher outputs.
5. EXTERN I/F > — Select or change settings for the Editor, DPM,
and Peripherals Interfaces connected to the Model 2200.
6. AUX BUS FORMAT > —Sets the “B” Aux Bus on Aux buses 5B–9B
to be either a separate video or key bus to accompany the
corresponding “A” Aux Bus. Set Aux Buses 1 through 4
(physical/logical) for shaped or unshaped video output.
CONFIGURATION MENU
/config
SYSTEM
PARAM >
USER
PREFS > INPUTS >
OUTPUTS >
EXTERN
I/F >
AUX BUS
FORMATS>