Filter
Top Products
2-59
Software Setup
3. Select LOG CHANNEL with the LOG/PHYS ASSIGNMENT button.
4. Rotate the VIDEO INPUT knob to assign the desired DPM number
and logical channel for this crosspoint. For example, assign
logical channel 1 of DPM 1 by selecting DPM 1 LOG CHAN 1.
5. Rotate the KEY INPUT knob to assign the desired DPM number
and logical channel for this crosspoint. For example, assign
logical channel 1 of DPM 1 by selecting DPM 1 LOG CHAN 1.
6. Press the top level CONFG button to return to the
Configuration Menu.
Configuring the Peripheral Interface
Use the Peripheral I/F Menu to set the Baud, Parity and
Peripheral Trigger parameters for the switcher peripheral port,
PORT A3, on the Expanded Communication Module.
MAP INPUTS MENU
SHAPED
VIDEO
config/inputs/map inputs
VIDEO/
KEY FMT
CHROMA KEY INPUT
= NONE
(INTERNAL)
VIDEO INPUT
= 4
(DIG SER/RGB/SETUP)
KEY INPUT
= 1
(DIG SER/8 BIT/SETUP/SYNC)
NAME XPT
BUTTON >
LOG/PHYS
ASSIGNMENT
UNSHAPED
VIDEO
38
(SHIFT-14)
LOG CHANNEL
PHYS CHANNEL
XPT BUTTON
NUMBER
XPT BUTTON
NAME
Use the Preset Bus to select button number.