Filter
Top Products
2-50
Section 2— Startup and Configuration
Processor and pressing the RESET button located near the
top of the Control Processor module.
Communication should now be established between the Model
2200 and Krystal.
For a DPM-700:
1. Set the DPM TYPE, to OTHER FIXED.
2. Set AUX BUS CONTROL to SWITCHER. (The DPM-700 cannot
control the aux bus.)
3. Turn the VIDEO DELAY soft knob to select 2 fields. It is important
that this be set correctly.
The CONTROL DELAY soft knob has no effect with the
DPM-700.
4. Set PORT ASSIGN to NONE.
5. Set CHANNEL ROUTING to OFF.