Filter
Top Products
2-58
Section 2— Startup and Configuration
6. Set up the aux bus format as described under the Aux Bus
Format heading later in this section. Make sure that any aux
buses assigned to Kaleidoscope are configured for KEY
operation of their B aux buses.
NOTE:
It is not necessary to set the format for aux buses that are to be
used for Effects Send. When Effects Send is selected, the B bus of each
selected aux bus is automatically configured as a key.
Mapping DPM Returns
Complete the DPM Setup by assigning the DPM channel returns
to Model 2200 crosspoints as follows:
1. Bring up the Map Inputs Menu by pressing the following
buttons:
CONFG, INPUTS>, MAP INPUTS>
2. Press a crosspoint button on the Preset bus to select the
crosspoint whose input mapping is to be changed.