Filter
Top Products
2-29
Software Setup
Mapping Crosspoints
Use the Map Inputs Menu to define the format for each video or
key input.
NOTE:
This function is applied to a key input only if the external key
is being used with video or superblack.
From the Inputs Menu, press the MAP INPUTS > button to select the
Map Inputs Menu.
1. With the VIDEO/KEY FMT, button, select UNSHAPED VIDEO or SHAPED
VIDEO
. Inputs should be set for UNSHAPED VIDEO unless
otherwise required.
2. With the LOG/PHYS ASSIGNMENT button, select
PHYS INPUTS.
3. Press the crosspoint button on the PST bus that you want to
map. (All crosspoints in that vertical column will have the
same inputs.)
MAP INPUTS MENU
SHAPED
VIDEO
config/inputs/map inputs
VIDEO/
KEY FMT
CHROMA KEY INPUT
= NONE
(INTERNAL)
VIDEO INPUT
= 4
(DIG SER/RGB/SETUP)
KEY INPUT
= 1
(DIG SER/8 BIT/SETUP/SYNC)
NAME XPT
BUTTON >
LOG/PHYS
ASSIGNMENT
UNSHAPED
VIDEO
38
(SHIFT-14)
LOG CHANNEL
PHYS CHANNEL
XPT BUTTON
NUMBER
XPT BUTTON
NAME
Use the Preset Bus to select button number.