Filter
Top Products
2-9
Software Setup
Setting User Preferences
Use the User Preferences Menus to gain access to keyer, preview,
and switcher defaults submenus.
1. From the Configuration Menu, press the USER PREFS > button
to access the User Preferences Menu.
2. Select either LATCH or NORMAL with the SHIFT MODE soft button.
The LATCH selection allows you to lock any switcher
crosspoint bus into a shifted (UPPERCASE) state. This
allows ready access to those input sources mapped to
shifted crosspoints. (See “Configuring Switcher Inputs”
on page 2-24.)
With LATCH enabled on the User Preferences Menu, press
and hold the SHIFT button while selecting a crosspoint.
The bus containing that crosspoint is now locked into a
shifted state. Any crosspoint selected on this bus will now
ANALOG INPUT TIMING MENU
INP 37-38
TIMING
INP 39-40
TIMING
CARD
SELECT
CARD 2
33-36
C0 4
41-44
45-48
49-52
53-56
57-60
61-64
CARD 1
CARD 3
CARD 4
CARD 5
CARD 6
CARD 7
CARD 8
CARD 2
4
3
2
1
4
3
2
1
1
1
INPUTS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
37-40
/config/inputs/anlg_inp_timing