Filter
Top Products
4-47
E-MEM (Effects Memory) Operations
300 Style Mode – 3-M/E Switchers Only
In 300 Style mode, when you do a Learn or Recall, the Master
E-MEM allows individual M/Es to “skew registers” (that is,
allows M/Es to point to different registers) than the Master
E-MEM is pointing and allows the Master E-MEM to learn the
individual M/E’s skewed register numbers. This operation does
not change the content of those skewed M/E registers, because the
operation does not write the current M/E settings into those
registers. You must independently learn the M/E settings into the
individual M/E E-MEMs.
Registers that are Learned using the Model 300 Style mode have
an “M” in the Master E-MEM display as a mode identifier.
The Learn and Recall operation, described in the previous Normal
mode text, is identical in the 300 Style mode. Therefore, that text is
not repeated here.
Operational Defaults in Either Mode
■ If Auto Run is ON when the register is Recalled, the keyframe
effect runs.
■ If Auto Run is OFF when the register is Recalled, the keyframe
effect does not run when Recalled.
■ If Auto Recall is ON when the register is Learned and ON
when the register is Recalled, the Switcher enables are learned
with the effect and re-established before the effect is recalled.
■ If Auto Recall is ON when the register is Learned and OFF
when the register is Recalled, the Switcher enables do not
change from the current settings.
■ If Auto Recall is OFF when the register is Learned and ON
when the register is Recalled, all Switcher enables go off.
If Effects Dissolve is ON when the register is Learned, the
Switcher runs the dissolve when the register is recalled whether
the Effects Dissolve button is currently ON or OFF