Filter
Top Products
2-27
Software Setup
Setting Analog Key Inputs
Use the Analog Key Inputs Menu to select the component format
for each analog key input.
1. From the Inputs Menu, press the ANLG KEY INPUTS > button to
select the Analog Key Inputs Menu as shown below.
2. Increment the CARD SELECT button until you reach the key
input you want to assign. There are 2 key inputs per card.
Here you are assigning a format to the key inputs on Card
2which handles key inputs 38 and 40.
3. After formatting the input, determine whether the key input
requires SETUP or NO SETUP. Do this by selecting KEY SETUP or
NO SETUP for each key input. The SETUP selection sets all
outputs for a black level 7.5 IRE above blanking. The NO SETUP
selection puts black at blanking level.
ANALOG KEY INPUTS MENU
INP 38 INP 40
CARD
SELECT
CARD 2
KEY SETUP
33-36
C0 4
41-44
45-48
49-52
53-56
57-60
61-64
CARD 1
CARD 3
CARD 4
CARD 5
CARD 6
CARD 7
CARD 8
CARD 2
NO SETUP
KEY SETUP
NO SETUP
NO SETUP
NO SETUP
INPUTS
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
NO SETUP
37-40
/config/inputs/anlg_key_inp