Filter
Top Products
4-50
Section 4— Switcher Operations
Recalling an Effect
1. Turn off the LEARN button if it is lit.
2. Select BANK ↑ and 0 through 9. (This step is optional if the
bank that you want is already selected.)
3. Select the register pushbutton (0-9) containing the previously
stored panel setup. The panel setup stored in the register will
immediately be recalled.
4. Observe the recalled effect on the Program monitor.
NOTE:
The E-MEM system learns and recalls the switcher controls but
does not cue the video and key sources serving as inputs to the switcher.
When you recall an effect, you may need to cue your sources to exactly
duplicate the picture that existed when the effect was learned.
Learning Effects Dissolve Transitions
The EFF DIS (effects dissolve) function causes an S-linear
transition from the current state to the next recalled register. The
current state may be a setup you have just done on the control
panel or the state resulting from a register recall.
An effects dissolve may be learned into a register, so that recalling
that register will initiate a dissolve to another specified register, or
may be added to a register by lighting the EFF DIS button before
selecting a register. Note that only the levels that are enabled on
the Enables buttons subpanel area will be learned as effects
dissolves.
1. Press LRN.
2. Press EFF DIS.
3. Press TRAN RATE. The query:
RATE = ? displays.