Filter
Top Products
2-52
Section 2— Startup and Configuration
Mapping DPM Aux Buses
Set up the aux bus-to-device assignment as follows:
1. From the DPM Setup Menu, press DPM MAP AUX BUSES> to
access the DPM Map Aux Buses Menu.
2. Select the desired device (1 through 4) by pressing the DEVICE
SELECT
button
3. For Kaleidoscope, rotate the NUMBER OF CHANNELS knob,
assigning aux buses 1 through ‘n’ to this device number. Note
that a Kaleidoscope device (or other poolable DPM) does not
allow you to select a starting aux bus number other than Aux
Bus 1.
DPM MAP AUX BUSES MENU
DEVICE
SELECT
DPM 2
CHAN 1
AUX 1
-
-
CHAN 2
AUX 2
-
-
DPM 1
DPM 3
DPM 4
NUMBER OF CHANNELS
= 2
CHANNEL 1
= AUX 6
CHAN 4
-
-
-
CHAN 6
-
-
-
CHAN 7
-
-
-
CHAN 8
-
-
-
CHAN 5
-
-
-
CHAN 3
AUX 3
-
-
config/extern if/dpm setup/dpm map aux buses
DPM 2 AUX 6 AUX 7 - - - ---
AUX 4
Connection of physical AUX buses
to physical channels
AUX 5MISC - - - -
-AUX 8