Filter
Top Products
2-33
Software Setup
Assigning GPI Inputs
Use the GPI Inputs Menu to set GPI assignments for signals that
can be used to trigger Model 2200 functions. These assignments
must correspond to the physical GPI connections described earlier
in this section.
Eight GPI inputs are provided. All of these accept pulse-type GPI
inputs except Aux Tally Back, which is level-sensitive.
1. From the Inputs Menu, press the GPI IN> button to select the
GPI Inputs Menu. (The first time you do this no functions will
appear in the second column of the menu table.)
The types of GPI assignments currently available are
Miscellaneous (Aux Tallies), Keyframe Effects, Auto
Transitions, Cuts, E-MEM registers, and Frame Stores, as
indicated by the button labels at the bottom of the display
window.
One of these functions is always selected. The selected
function is indicated in parentheses under the
FUNCTION
SELECT
knob label.
FUNCTION SELECT
(MISC)
GPI INPUTS MENU
config / inputs / gpi inputs
GPI
SELECT
KF
EFFECT
AUTO
TRANS E-MEMCUT
AUX BUS
= 1
PROGRAM
GPI
FRAME
STORE
AUX TALLY
BUS 1?
When the desired function is selected,
press PROGRAM GPI button to set the
selected GPI input to the
selected function
Choose from these 6 buttons to select various
categories of GPI functions. Then use the
FUNCTION SELECT knob to select a function
DISABLE
GPI
LOG CHAN
TALLY
AUX
TALLY
GPI 1
M/E 1 AUTO TRAN
M/E 1 CUT
RUN EFFECT
MASTER RECALL EFF - 26
GPI DISABLED
FRAME STORE VIDEO GRAB
SEQUENCE MODE
GPI 2
GPI 3
GPI 4
GPI 5
GPI 6
GPI 7
GPI 8
AUX TALLY - BUS 1
GPI 1
MISC