Filter
Top Products
2-13
Software Setup
NOTE:
The optional M/E Preview Mezzanine must be installed for each
M/E in order to select AUTO and LOOKAHEAD Preview Modes. THESE
SELECTIONS
will not be displayed in the MENU if the mezzanine board is
not installed.
The Preview Mode choice depends on how many monitors
you have per M/E, and how you wish to use them (see
Figure 2-2).
AUTO – Use this mode to automatically toggle between
PGM and PVW (next transition) when a single M/E
monitor is used. A high tally on the M/E displays PVW
output. A low tally on the M/E displays PGM output.
LOOKAHEAD – Use to review what is going on-air next.
Always shows the next transition of the selected M/E.
PGM – Use this selection to have the PGM output of the
M/E or PGM/DSK displayed on the Preview monitor.
(Useful if your PGM monitor goes down — signal is feed
from the switched PVW output.
KEY PVW – (Displayed when PGM/PST is selected.)
Previews DSK 1 and DSK 2 keys over the PGM/PST
transition on the Preview Monitor.