Filter
Top Products
2-19
Software Setup
Setting System Parameters
Use the System Parameters Menu to set the aspect ratio (ratio of
television picture width to height), to select the matte generator
chroma limiting algorithm, and to set the system clock.
Press the SYSTEM PARAMS > soft button below the Configuration
Menu display to bring up the System Parameters Menu:
Note that some of these system parameters were set up during
installation.
ASPECT RATIO — Soft button may be set to either the 4 X 3 or 16 X 9
setting, depending on your installation requirements.
FIELD DOMINANCE — FIELD DOMINANCE set to NONE), selection
changes become effective at the beginning of the next field
(immediately after the functions have been changed).
SYSTEM PARAMETERS MENU
BOTH
config/system param
ASPECT
RATIO
MATTE
GEN LIM
SET
CLOCK >
16 X 9
VALID RGB
NONE
4 X 3
XMITABLE
FIELD 2
FIELD
DOMINANCE
NONE
FIELD 1