Filter
Top Products
2-26
Section 2— Startup and Configuration
Setting Analog Video Inputs
Use the Analog Video Inputs Menu to select the component
format with setup or no setup for each analog video input.
1. From the Inputs Menu, press the ANLG VIDEO INPUTS > button to
select the Analog Video Inputs Menu as shown below.
2. Increment the CARD SELECT button until you reach the video
input you want to assign. There are 2 video inputs per card. In
the menu above a format is assigned to the video inputs on
Card 2 for inputs 37 and 39.
3. After formatting the input, you must determine whether the
video input requires SETUP or NO SETUP. Do this by selecting
ON or OFF for each input. The SETUP selection sets all outputs
for a black level 7.5 IRE above blanking. The NO SETUP
selection puts black at blanking level.
ANALOG VIDEO INPUTS MENU
INP 37
FORMAT
INP 39
FORMAT
INP 37
SETUP
INP 39
SETUP
CARD
SELECT
CARD 2
ON
33-36
C0 4
41-44
45-48
49-52
53-56
57-60
61-64
RGB
YUV
MII
CARD 1
CARD 3
CARD 4
CARD 5
CARD 6
CARD 7
CARD 8
CARD 2
BETA
OFF
ON
OFF
OFF
BETA
BETA
INPUTS
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
BETA
37-40
OFF
/config/inputs/anlg_vid_inp
RGB
YUV
MII
BETA