Filter
Top Products
4-86
Section 4— Switcher Operations
Loading – Recalling E-MEM Files from Disk
This procedure describes loading E-MEM files. You can load a
stored E-MEM effect from disk into an E-MEM register (for
example, register #23). You can also load an entire E-MEM bank
(of 10 registers), or all E-MEM registers.
NOTE:
The register file extension (for example, .R23) mandates that the
recall will be read into register number 23.
1. Insert your E-MEM effects diskette into the switcher disk
drive.
2. Access the Disk Menu. Press the CHILD DIRECTORY button to
cause the switcher to read the diskette and list the parent
directory.
3. Highlight the E-MEM subdirectory and press CHILD
DIRECTORY
again to display the “E-MEM” subdirectory and
list its’ files.
4. Use the FILE SELECT soft knob to highlight file ” Effects1.”
5. Press the LOAD FILE button. The Load File Menu displays.
6. Select LOAD for M/E 1 and PGM/PST/DSK.
CAUTION
Be careful with your selection. It is possible to overwrite all E-MEM
registers, or one bank of registers, with one register.
7. Select E-MEM REGISTER with the E-MEM LOAD SELECT soft
knob.
8. Press the DO LOAD button.
The menu displayed now is the Confirm File Load Menu.
Press DO LOAD to confirm the register recall.