Filter
Top Products
A-14
Appendix A — Shaped and Unshaped Video
When the Effects Send option is not present, the SHAPED/
UNSHAPED
selections for the Aux Buses are not visible in the
menu.
Figure A-12. Model 3000 Outputs Menu (Software v5.0)
For the Model 4000 or Model 2200:
1. Press the CONFG button on the switcher’s main menu panel,
then the AUX BUS FORMAT> soft button in the Configuration
menu, and the AUX BUS SHAPING> button in the Aux Bus
Format menu to bring up the Aux Bus Shaping menu, shown
in Figure A-13.
2. Set the VIDEO/KEY FMT selections for Aux Buses 1 through 4
(Aux 1 and 2 on the 2200) to match the characteristic SHAPED
or UNSHAPED expected by the external devices connected to
those outputs. These settings control the states of the
unshapers on the Aux Bus outputs.
OUTPUTS MENU
ON ON
config / outputs
CHROMA CLIP
= 105 %
LUM CLIP
= 105 IRE
ON
COMPOSITE CLIP
= 138 IRE
SHAPED
PGM
M/E 1 PGM
M/E 2 PGM
M/E 3 PGM
AUX BUS 1
AUX BUS 2
AUX BUS 3
AUX BUS 4
AUX BUS 5
AUX BUS 6
AUX BUS 7
FRAMESTORE
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SHAPED
SHAPED
SHAPED
UNSHAPED
-
-
-
-
BLACK CLIP
= -20 IRE
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
UNSHAPED
OFF
OFF
OFF
PGM OFF ONSHAPEDOFF
SUPER
BLACK
OUTPUT
SELECT
SETUP
ON KEY
VIDEO/KEY
FMT LIMITER
DIGITAL
RES >