Filter
Top Products
9 TCP/IP (LPD or Port9100)
106 Xerox WorkCentre 7232/7242 System Administration Guide
TCP/IP (LPD or Port9100) Environments
System configuration
As the machine supports the LPD and Port9100 protocol, you can print directly from a
Windows computer.
When printing through Port9100, change the necessary settings on the computers.
The transport protocol for LPD and Port9100 can be TCP/IP.
You will also need to set up the IP address on the machine and the Windows
computers.
Target computers
The following operating systems support printing through LPD or Port9100.
NOTE: The optional PostScript Kit is required when you print from Macintosh.
TCP/IP (LPD or Port9100) Installation
This section describes how to set up the machine to use the LPD and Port9100
protocols.
Installation Procedure
There are three stages to enable printing to the machine through LPD or Port9100.
Network Communication Setup
Enable the following ports using the touch screen or CentreWare Internet Services.
Connection OS Protocol
LPD port Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Linux
Unix
Solaris
TCP/IP
Port9100 Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Linux
Unix
Solaris
TCP/IP