Filter
Top Products
Using CWIS to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide 59
LDAP
This page allows you to configure the LDAP settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3. Select the plus symbol [+] to the left of the [Protocols] folder.
4. Select the plus symbol [+] to the left of the [LDAP] folder.
5. Select [LDAP Server], [LDAP User Mappings], [LDAP Authentication], [LDAP
Group Access], or [Custom Filters].
6. Set up the following, as displayed in the frame.
LDAP Server
Server Information:
• IP Address/Host Name & Port – In the first text box, enter the server name or IP
address of the primary LDAP server in IPv4 or IPv6 format. In the second text
box, enter the port number of the primary LDAP server.
• Backup IP Address/Host Name & Port – In the first text box, enter the server
name or IP address of the secondary LDAP server in IPv4 or IPv6 format. In the
second text box, enter the port number of the secondary LDAP server.
• Server Application – Select a directory application from [Microsoft Active
Directory], [Novell NetWare], [IBM Lotus Domain 6], and [Other Applications].
Optional Information:
• Search Root Entry DN – Enter a distinguished name that represents the search
start point. Up to 255 characters can be used.
• Search Login Name – Enter the login name of the LDAP server that requires
authentication. Up to 128 characters can be used.
• Search Password – Enter the password for the search login name using up to
32 characters. If the server does not require authentication, or a password is not
required upon authentication, leave this text box blank.
• Re-enter Search Password – Re-enter the password for verification.
• Maximum Number of Search Results – Specify the maximum number of search
result entries.
• Search Time-Out – Specify whether the server timeout limit will be used, or how
many seconds the search should last.
• Referral – Allows you to enable or disable LDAP referrals.
• Referral Hop Limit – Specify the referral hop limit from 1 to 5.