Filter
Top Products
SMB
Xerox WorkCentre 7232/7242 System Administration Guide 181
When the machine or other SMB machines are not found from client computers
When printing fails
When the document cannot be deleted from the printer window
Cause Confirmation Method Action
If the SMB [Auto Master
Mode] is [On], there are limits
on the number of machines
that can retain the machine
information. The number
varies with the network
environment.
The machine or other SMB
machines cannot be found
using the network computer
icon.
Check the SMB [Auto Master
Mode] setting. If set to [On],
change the setting to [Off].
Cause Confirmation Method Action
The machine is processing a
print request from another
client. (The receiving buffer is
set to non-spool mode).
Check that the machine has
a print job in progress. (This
indicates whether there are
files ready to print, and
displays any write error
dialogs.
After the machine has
processed the print request,
send a print job or change the
mode to the spool mode.
The number of sessions
exceeds the maximum.
Check that the machine is
processing simultaneous
requests (such as print
request or status inquiry
request) from multiple clients.
(This indicates remote clients
unable to use the machine,
and displays any write error
dialogs.)
Wait for a while, and send a
print request again.
Cause Confirmation Method Action
An attempt is made to delete
all documents displayed in
the printer window.
(Only the System
Administrator)
Check whether the attempt is
made to delete the print job
from the Printer menu in the
printer window.
Delete the print job from the
Document menu in the printer
window.
The document owner is
invalid.
Check whether the owner of
the selected document
matches the Windows log-in
name.
Use the owner name of the
document to log in to
Windows, and then delete the
document.
Service Pack 4.0 or later is
not installed in the system.
(In Windows NT 4.0)
Check the Service Pack
version to be displayed when
you start Windows NT 4.0.
Install Service Pack 4.0 or
later.