Filter
Top Products
NetWare
Xerox WorkCentre 7232/7242 System Administration Guide 187
The default machine name is
invalid.
Print the System Settings
List, and then check that the
6 least significant digits of the
Ethernet address are correct.
Specify the correct Ethernet
address, or assign a name
other than the default.
No directory tree name is
specified.
Print the System Settings
List, and then check that a
tree name is specified.
Specify a tree name.
No context is specified. Print the System Settings
List, and then check that a
context is specified.
Specify a context.
Another printer object has
been connected.
Use NWADMIN to check that
the object is correctly
assigned to the required print
server.*
Use PCL Print Driver CD-
ROM or CentreWare Internet
Services to specify the
correct file server name, tree
name, context name, and
active mode.
The file server goes down. Select [Network
Neighborhood] of Windows to
search for the file server.
Activate the file server.
A printer having the same
machine name exists on the
network.
Switch off the machine, and
then use NWADMIN to check
that the printer object is in the
job standby status.
Use PCL Print Driver CD-
ROM to specify another
machine name.
The NetWare port is not
activated.
Print the System Settings
List, and then check that the
port is activated.
Activate the NetWare port.
Print the System Settings
List. When using IPX/SPX,
check that the network
number remains set to
00000000 (NetWare server
down). When using TCP/IP,
check that the IP address
remains set to 0.0.0.0 (fixed
IP address not specified) or
an address supply server
(DHCP server down).
When using IPX/SPX, start
the NetWare server. When
using TCP/IP, set the fixed IP
address or start the address
supply server (DHCP).
Invalid printer configuration. Use NWADMIN or
PCONSOLE to check that the
printer configuration is
correct.*
Use NWADMIN or
PCONSOLE to set the
following items.
Printer type: Parallel
Port: LPT 1
Printer Location: Auto Load
(Local).*
Cause Confirmation Method Action