Filter
Top Products
DOCUCOLOR 12 USER GUIDE 7–3 OUTPUT FORMATS
1
2
3
4
5
6
7
Multiple-Up
The Multiple-Up feature (Figure 2) enables you to
copy 2, 4, or 8 images from multiple originals onto
a single page, as illustrated in Figure 3. Each
image is centered in its space.
The default is set to 1 Page Up to produce a single
image on a single page.
NOTE: Keep the following notes in mind when
using Multiple-Up:
• All originals must be the same size. Paper
size or magnification is determined by the first
original that is scanned.
• Do not Interrupt the Multiple-Up job.
• The following features may not be used in
conjunction with Multiple-Up:
– Margin Shift
– Repeat Image
– Book Copying
• When you copy original documents from the
Document Glass, you can only select a 25-
100% reduction.
• Depending on the size of the original, some
image loss might occur along the edge of the
image.
• Enlarged images cannot exceed 17 inches
(432 mm) in the X direction.
• Do not use 12 x 18-inch or SRA3 paper.
The order and final rotation of images depend on
the selections you make for the Image Order and
Original Orientation options, which are described
below.
Figure 2: Multiple-Up feature
Figure 3: Example of Multiple-Up
F E
Four
originals:
Four-up
output:
F
E