4-16 Receiving a Fax
Note:
When LaserFAX Lite is running it is not possible to print or scan
using the WorkCentre 480cx if
Receive faxes to PC
is selected.
If Receive Fax to PC is selected, to allow printing or scanning on the
WorkCentre 480cx you must shutdown LaserFAX Lite, or temporarily
disable Receive Faxes to the PC by performing the following steps:
1
Select the Display, Device information menu.
2
Double click WorkCentre 480cx and de-select the Receive faxes to PC
option.
3
Click OK.
4
Repeat this process to re-enable Receive Faxes to the PC later.
Troubleshooting LaserFAX Lite
When LaserFAX Lite does not activate, ensure that:
The WorkCentre 480cx is connected and plugged in.
The parallel interface cable is properly connected and is not longer than
6 feet.
No error message is displayed on the WorkCentre 480cx. If an error
message is displayed, check the Troubleshooting section of this manual
to diagnose the problem.
Print the 480cx User Guide