Xerox 480cx All in One Printer User Manual


 
System Setup 1-41
1
Arrange Alignment
The Arrange Alignment menu settings provides an easy way to check and
adjust Ink Cartridge print head alignment.
To run the Arrange Alignment:
1
Press the Menu button, then press the Maintenance button on the one-
touch keypad. The display indicates SELF TEST ?.
2
Press the Down button. ARRANGE ALIGNMENT ? appears in the
display.
3
Press the Start/Enter button. PRINTING... appears on the LCD display.
The WorkCentre 480cx will then print out a Cartridge Alignment
pattern sheet consisting of a series of four test patterns. The patterns are
designated A,B,C, and D. Each pattern is made up of a series of lines
which are individually numbered. By selecting the straightest line from
each pattern, you can optimize the print head alignment.
After printing out the Cartridge Alignment sheet, the Cartridge
Maintenance set up menu appears on the LCD display.
The letter A, located on the right end of the lower line in the display,
corresponds to alignment test pattern A. The range of numbers
bracketed in the center of the display line indicates the range of valid
pattern selection choices. The flashing number on the left side of the
display indicates the line from print pattern A that is currently selected
as optimal.
4
Using the Number Keypad, enter the number of the line which appears
the straightest from pattern A.
CARTRIDGE MAINT.
<15> [0-30] A
Print the 480cx User Guide