Telephone Connectivity Guidelines 9-31
9
Plug one end of a telephone cable into the WorkCentre’s
Line
connector,
and the other end into the wall outlet. Also, plug the PC fax/data modem
Line
into
the wall outlet. Plug the extension telephone into the
EXT
connector. The PC printer port is connected to the WorkCentre’s printer port
with the Xerox supplied printer cable.
You should use the PC fax/data/voice mail to answer incoming calls and
receive faxes. Use the WorkCentre to send hard copy faxes and print.
At the WorkCentre, set the
Receive mode
to
TEL
. At the control panel,
press the Receive button (until TEL displays).
Consult your PC fax/data modem documentation for answer mode and other
settings.
Print the 480cx User Guide