Filter
Top Products
System Setup 1-53
1
REMOTE RCV CODE - The remote receive start code allows you to
initiate fax reception from an extension phone plugged into the EXT
jack on the back of the machine. If you pick up the extension phone and
hear fax tones, enter the Remote Code and the machine will start
receiving. The Remote Code is preset to *9* at factory. You may
change the Remote Code by selecting any number from 0 to 9 on the
numeric keypad.
DIAL MODE - Select the type of dial system your fax machine is
connected to:
Press 1 if the fax machine is connected to a tone (Touch Tone) dial line.
Press 2 if the fax machine is connected to a pulse (Rotary) dial line.
ECM MODE (Error Correction Mode) - This mode compensates for
poor line quality and ensures accurate, error-free communication with
any other ECM-equipped facsimile machine. If the line quality is poor,
transmission time may be increased when ECM is enabled.
Press 1 to turn the Error Correction mode on.
Press 2 to turn the Error Correction mode off.
RX REDUCTION - When receiving a document as long as or longer
than the paper installed in your machine, the machine can reduce the
data in the document to fit the paper size in the machine. Use this
feature if you want to automatically reduce an incoming page (that
would otherwise be divided into two pages) to fit on a single page. If the
fax machine cannot reduce the data to fit into one page with this feature
enabled, the data is divided and printed in actual size on t wo or more
sheets.
There are two RX Reduction modes available, On and Vertical Only.
Press 1 to turn the RX reduction feature on. Note that this feature does
not apply to the copy mode.
Print the 480cx User Guide