Filter
Top Products
3-16 Sending a Fax
Configuring Automatic Dialing Features
One-Touch Dialing
One-Touch dialing lets you use any one of the 20 One-Touch buttons
located on the left of the machine’s control panel to automatically dial a
number.
Storing a Number for One-Touch Dialing
1
When assigning a One-Touch number, press and hold the One-Touch
button (01 through 20) for 2 seconds. The display shows TXX:, where
"T" signifies you are assigning a One-Touch number and "XX"
designates the selected One-Touch button.
If a number is already stored in the location, the display shows the
number in the upper line and 1:RENEW 2:OTHER in the bottom line.
Press 1 to delete the existing number or 2 to select another One-Touch
button.
2
Enter the number you want to store (up to 46 digits) using the Number
keypad, then press Start/Enter.
To insert a pause between numbers when dialing, press the Redial/
Pause button.
If you make a mistake while entering a number, use the Right or Left
buttons to move the cursor under the wrong digit, then enter the correct
digit, or press the Delete button.
3
The display asks you to enter a name. Using the Number keypad, enter
the desired name (up to 20 alphanumeric characters). For information
on how to enter names, see Entering Alphanumeric Characters on page
3-26.
Or
If you don’t want to assign a name, skip this step.
Print the 480cx User Guide