1-10 Getting Started
3
Press the Start button. A flashing cursor will appear on the first
character of the date in the LCD display.
4
Enter the date and time using the Number Keypad. If you need
assistance entering characters using the Number keypad, refer to
Entering Alphanumeric Characters
on page 3-26.
5
Press the
Start/Enter
button to confirm your settings.
The WorkCentre 480cx returns to standby mode. If there are no ink
cartridges installed, ALL CART. EMPTY appears in the top line of the
display.
Note: If you do not set the date and time, after a short period of time the
machine will automatically accept whatever date and time are displayed on
power up. It will then go into standby mode.
Note: To power off the machine, unplug the power cord. Power must be
applied at all times if the machine is used as an unattended fax machine.
Print the 480cx User Guide