Manual Faxing 3-5
3
Sending a Fax Using a Speed Dial Number
1
Adjust the document guides to match the width of the document.
2
Slide the document
face down
into the Automatic Document Feeder
until it is grasped and pulled into the machine.
Note:
Pressing the Express button automatically selects Standard
resolution. This will allow the WorkCentre 480cx to scan each page into
memory in three seconds, reducing total fax time.
3
Press the Speed button, then enter a two digit speed dial location
number. For information on storing numbers in memory,
Speed Dialing
on page 3-19.
4
Press the
Start/Enter
button to dial the number.
The machine will scan the document and dial the number automatically.
When the remote fax machine answers, the document will be
transmitted automatically.
Note:
You can store One-Touch or Speed Dial numbers so you can dial
your most frequently used numbers with one touch of a button or a two digit
speed dial number. For information on storing numbers in memory, see
Configuring Automatic Dialing Features
on page 3-16.
Sending a Fax Using Group Dialing
(Multi-Address Transmission)
Group Dialing can be used in conjunction with Memory Transmission or
Delayed Transmission faxing operations. However, before you can access
the Group Dialing feature, Group Numbers must be configured. See
Grou p
Dialing (for Multi-Address Transmission)
on page 3-20 for more
information.
Print the 480cx User Guide