Filter
Top Products
Chapter 13 WISP + UR Mode
NBG4615 User’s Guide
100
13.3.1 Setting your NBG4615 to WISP + UR Mode
1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on
how to do this.
2 To set your NBG4615 to WISP + UR Mode Mode, go to Maintenance > Sys OP Mode >
General and select WISP + UR Mode.
Figure 71 Changing to WISP + UR mode
Note: You have to log in to the Web Configurator again when you change modes. As soon
as you do, your NBG4615 is already in WISP + UR mode.
3 When you select WISP + UR Mode, the following pop-up message window appears.
Figure 72 Pop up window for WISP mode
Click OK. The Web Configurator refreshes once the change to WISP mode is successful.
13.3.2 Accessing the Web Configurator in WISP Mode
To login to Web Configurator in WISP + UR Mode, do the following:
1 Connect your computer to the LAN port of the NBG4615.