Filter
Top Products
Chapter 24 Firewall
NBG4615 User’s Guide
187
4 Don't enable any local service (such as NTP) that you don't use. Any enabled service could present
a potential security risk. A determined hacker might be able to find creative ways to misuse the
enabled services to access the firewall or the network.
5 For local services that are enabled, protect against misuse. Protect by configuring the services to
communicate only with specific peers, and protect by configuring rules to block packets for the
services at specific interfaces.
6 Protect against IP spoofing by making sure the firewall is active.
7 Keep the firewall in a secured (locked) room.
24.2 General
Use this screen to enable or disable the NBG4615’s firewall, and set up firewall logs. Click Security
> Firewall to open the General screen.
Figure 120 Security > Firewall > General l
The following table describes the labels in this screen.
24.3 Services
If an outside user attempts to probe an unsupported port on your NBG4615, an ICMP response
packet is automatically returned. This allows the outside user to know the NBG4615 exists. Use this
screen to prevent the ICMP response packet from being sent. This keeps outsiders from discovering
your NBG4615 when unsupported ports are probed.
You can also use this screen to enable service blocking, enter/delete/modify the services you want
to block and the date/time you want to block them.
Table 75 Security > Firewall > General
LABEL DESCRIPTION
Enable Firewall Select this check box to activate the firewall. The NBG4615 performs access
control and protects against Denial of Service (DoS) attacks when the firewall is
activated.
Apply Click Apply to save the settings.
Cancel Click Cancel to start configuring this screen again.