Filter
Top Products
Chapter 11 Universal Repeater Mode
NBG4615 User’s Guide
89
11.6.3 WPA(2)-PSK
Figure 59 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG4615.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 35 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP (continued)
LABEL DESCRIPTION
Table 36 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
LABEL DESCRIPTION
Universal Repeater Parameters
Enable Select this option to have the NBG4615 connect to the specified access point.
SSID Enter the name of the access point to which you are connecting.
MAC Address
(Optional)
Enter the MAC address of the access point to which you are connecting.
Security Mode Select WPA-PSK or WPA2-PSK if the access point to which you want to connect
uses WPA-PSK or WPA2-PSK.
Encryption Type Select the type of wireless encryption employed by the access point to which you
want to connect.
Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the password employed by the access point to which you want to connect.
Apply Click Apply to save your changes back to the NBG4615.
Reset Click Reset to reload the previous configuration for this screen.