Filter
Top Products
Chapter 3 ZyXEL NetUSB Share Center Utility
NBG4615 User’s Guide
29
3.2.2 The ZyXEL NetUSB Share Center Configuration Window
This section describes the utility’s configuration window, which allows you to set certain options for
the utility. These options do not apply to the USB devices connected to the NBG4615.
You can open it by clicking the Tools > Configuration menu command.
Figure 4 ZyXEL NetUSB Share Center Utility Configuration Window
The following table describes the labels in this window.
3.2.3 The Auto-Connect Printer List Window
This section describes the utility’s auto-connect printer list window. You can open it by clicking the
Tools > Auto-Connect Printer List menu command.
Note: If the computer is connecting to the shared USB printer for the first time, you need
to click Connect and setup the printer before you can use the Auto-Connect
Printer function. See Chapter 14 on page 121 for more details.
Table 4 ZyXEL NetUSB Share Center Utility Configuration Window
LABEL DESCRIPTION
Basic Select this to run the utility automatically when you log into or start up
Windows.
Language Select a language for the ZyXEL NetUSB Share Center Utility. You must
restart the utility for the change to take effect.
OK Click this to save your changes and close the window.
Cancel Click this cancel to close the window without saving.
Apply Click this to save your changes without closing the window.