Filter
Top Products
Chapter 27 Remote Management
NBG4615 User’s Guide
204
27.3 WWW Screen
To change your NBG4615’s remote management settings, click Management > Remote
Management > WWW.
Figure 129 Management > Remote Management > WWW
The following table describes the labels in this screen.
Table 83 Management > Remote Management > WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server Access Select the interface(s) through which a computer may access the
NBG4615 using this service.
Secured Client IP
Address
Select All to allow all computes to access the NBG4615.
Otherwise, check Selected and specify the IP address of the computer
that can access the NBG4615.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.