Filter
Top Products
Chapter 12 WISP Mode
NBG4615 User’s Guide
95
12.5 Wireless LAN General Screen
Use this screen to configure the wireless LAN settings of your NBG4615. Go to Configuration >
Wireless LAN > General to open the following screen.
Figure 65 WISP Mode: Wireless LAN > General
The following table describes the labels in this screen.
12.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 66 No Security (WISP)
The following table describes the labels in this screen.
Table 38 WISP Mode: Wireless LAN > General
LABEL DESCRIPTION
WISP Parameters
SSID Enter the name of the access point to which you are connecting.
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called
a channel. The device will automatically select the channel with the least
interference.
Security Mode Select the security mode of the access point to which you want to connect.
Apply Click Apply to save your changes back to the NBG4615.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 39 No Security (WISP)
LABEL DESCRIPTION
WISP Parameters
SSID Enter the name of the access point to which you are connecting.
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called
a channel. The device will automatically select the channel with the least
interference.
Security Mode Select No Security in this field.