Filter
Top Products
NBG4615 User’s Guide 203
CHAPTER 27
Remote Management
27.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG4615 from a remote location through the
following interfaces:
•LAN and WAN
•LAN only
•WAN only
Note: The NBG4615 is managed using the Web Configurator.
27.2 What You Need to Know
Remote management over LAN or WAN will not work when:
1 The IP address in the Secured Client IP Address field (Section 27.3 on page 204) does not match
the client IP address. If it does not match, the NBG4615 will disconnect the session immediately.
2 There is already another remote management session. You may only have one remote
management session running at one time.
3 There is a firewall rule that blocks it.
27.2.1 Remote Management and NAT
When NAT is enabled:
• Use the NBG4615’s WAN IP address when configuring from the WAN.
• Use the NBG4615’s LAN IP address when configuring from the LAN.
27.2.2 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
NBG4615 automatically logs you out if the management session remains idle for longer than this
timeout period. The management session does not time out when a statistics screen is polling. You
can change the timeout period in the System screen