Filter
Top Products
Chapter 28 Universal Plug-and-Play (UPnP)
NBG4615 User’s Guide
206
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
28.3 UPnP Screen
Use this screen to enable UPnP on your NBG4615.
Click Management > UPnP to display the screen shown next.
Figure 130 Management > UPnP
The following table describes the fields in this screen.
28.4 Technical Reference
The sections show examples of using UPnP.
28.4.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the NBG4615.
Make sure the computer is connected to a LAN port of the NBG4615. Turn on your computer and
the NBG4615.
28.4.1.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
Table 84 Management > UPnP
LABEL DESCRIPTION
Enable the Universal Plug
and Play (UPnP) Feature
Select this check box to activate UPnP. Be aware that anyone could
use a UPnP application to open the web configurator's login screen
without entering the NBG4615's IP address (although you must still
enter the password to access the web configurator).
Apply Click Apply to save the setting to the NBG4615.
Cancel Click Cancel to return to the previously saved settings.