Filter
Top Products
Chapter 10 Access Point Mode
NBG4615 User’s Guide
78
10.4 AP Mode Status Screen
Click to open the Status screen.
Figure 49 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 31 Status Screen: Access Point Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is
for identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 7.1.2 on page 55) to which the NBG4615 is set -
Access Point Mode.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information