Filter
Top Products
Chapter 26 Bandwidth Management
NBG4615 User’s Guide
196
26.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the Upstream Bandwidth that you configure in the Bandwidth
Management Advanced screen (Section 26.5 on page 196).
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth
Management Advanced screen Section 26.5 on page 196.
26.4 General Screen
Use this screen to have the NBG4615 apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management General screen.
Figure 124 Management > Bandwidth Management > General
The following table describes the labels in this screen.
26.5 Advanced Screen
Use this screen to configure bandwidth management rules for the pre-defined services or
applications.
You can also use this screen to configure bandwidth management rule for other services or
applications that are not on the pre-defined list of NBG4615. Additionally, you can define the source
and destination IP addresses and port for a service or application.
Table 78 Management > Bandwidth Management > General
LABEL DESCRIPTION
Enable Bandwidth
Management
This field allows you to have NBG4615 apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.