Filter
Top Products
Chapter 14 Tutorials
NBG4615 User’s Guide
106
4 Log into NBG4615’s Web Configurator and press the Push Button in the Configuration >
Network > Wireless Client > WPS Station screen.
Note: Your NBG4615 has a WPS button located on its back panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The NBG4615 sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the NBG4615 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG4615 and wireless client (the NWD210N in this example).
Figure 75 Example WPS Process: PBC Method
14.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG4615’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
Wireless Client
Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES