Filter
Top Products
NBG4615 User’s Guide 99
CHAPTER 13
WISP + UR Mode
13.1 Overview
In WISP + UR mode, the NBG4615 has the same function as in WISP mode. In addition, it can
provide WiFi function to the clients on the LAN side.
In the example below, one NBG4615 (A) is configured as WISP +UR mode and another is used as
an access point (B). The NBG4615 (A) wirelessly connects to the available access point (B), and
can provide WiFi wireless function to clients on its LAN side.
Figure 70 WISP + UR Mode
13.2 What You Can Do
•Use the Status screen to view read-only information about your NBG4615 (Section 11.5 on page
84).
•Use the LAN screen to set the IP address for your NBG4615 acting as an access point (Section
10.5 on page 80).
•Use the Wireless LAN screen to associate your NBG4615 (acting as a wireless client) with an
existing access point (Section 12.5 on page 95).
13.3 What You Need to Know
The Monitor, Configuration and Maintenance screens in WISP + UR mode are similar to the
ones in Router mode. See Chapter 15 on page 125 through Chapter 29 on page 221 of this User’s
Guide.
built-in
firewall
Access
Point
WISP + UR
A
B