Filter
Top Products
Chapter 13 WISP + UR Mode
NBG4615 User’s Guide
101
2 The default IP address of the NBG4615 is “192.168.1.1”. If you did not change this, you can use the
same IP address in WISP + UR Mode. Open a web browser such as Internet Explorer and type
“192.168.1.1” as the web address in your web browser.
If you changed the IP address of your NBG4615 while in Router mode, use this IP address in WISP
+ UR Mode Mode. The WISP + UR Mode Mode IP address is always the same as the Router
mode IP address.
Note: After clicking Login, the Easy Mode appears. Refer to Section on page 57 for the
Easy Mode screens. Click Expert mode to see the screens described in the
sections following this.
13.4 WISP + UR Mode Status Screen
Click to open the status screen.
Figure 73 Status: WISP + UR Mode