Filter
Top Products
Chapter 17 WAN
NBG4615 User’s Guide
158
This screen displays when you select L2TP encapsulation.
Figure 99 Network > WAN > Internet Connection: L2TP Encapsulation
The following table describes the labels in this screen.
Table 61 Network > WAN > Internet Connection: L2TP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Connection Type To configure a L2TP client, you must configure the User Name and
Password fields for a layer-2 connection and the L2TP parameters for an
L2TP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Retype to Confirm Type your password again to make sure that you have entered is correctly.
L2TP Configuration
Server IP Address Type the IP address of the L2TP server.
Get automatically
from ISP
Select this option If your ISP did not assign you a fixed IP address. This is
the default selection.
Use Fixed IP Address Select this option If the ISP assigned a fixed IP address.