Filter
Top Products
NBG4615 User’s Guide 183
CHAPTER 23
RIP
23.1 Overview
Routing Information Protocol (RIP) is an interior or intra-domain routing protocol that uses
distance-vector routing algorithms. RIP is used on the Internet and is common in the NetWare
environment as a method for exchanging routing information between routers.
23.2 RIP Screen
Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast protocols. Click Network >
RIP. The screen appears as shown.
Figure 118 Network > RIP
The following table describes the labels in this screen.
Table 74 Network > RIP
LABEL DESCRIPTION
RIP Select the RIPv1 or RIPv2 you want the NBG4615 to use.
Otherwise select None.
Apply Click Apply to save your changes back to the NBG4615.
Cancel Click Cancel to begin configuring this screen afresh.