Filter
Top Products
Chapter 11 Universal Repeater Mode
NBG4615 User’s Guide
87
Note: To have wireless clients access or acquire an IP address from another access point
or wireless router (B) through the NBG4615 (A) in universal repeater mode, you
must set the channel number in the Wireless LAN > General screen to be the
same as the one on the wireless router or AP to which the NBG4615 wants to
connect.
11.6.1 No Security
Figure 57 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
The following table describes the labels in this screen.
A
B
Table 34 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
LABEL DESCRIPTION
Universal Repeater Parameters
Enable Select this option to have the NBG4615 connect to the specified access point.
SSID Enter the name of the access point to which you are connecting.
MAC Address
(Optional)
Enter the MAC address of the access point to which you are connecting.
Security Mode Select No Security if the access point to which you want to connect does not use
encryption.
Apply Click Apply to save your changes back to the NBG4615.
Cancel Click Cancel to reload the previous configuration for this screen.