Filter
Top Products
Chapter 29 Maintenance
NBG4615 User’s Guide
221
WISP
A WISP client connects to an existing access point wirelessly. It acts just like a wireless client in
notebooks/computers.
Figure 150 IP Address in Access Point Mode
29.10 Sys OP Mode Screen
Use this screen to select how you want to use your NBG4615.
Figure 151 Maintenance > Sys OP Mode
The following table describes the labels in the General screen.
Access Point
Wireless Client
Table 90 Maintenance > Sys OP Mode
LABEL DESCRIPTION
System Operation Mode
Router Select Router Mode if your device routes traffic between a local network
and another network such as the Internet. This mode offers services such
as a firewall or bandwidth management.
You can configure the IP address settings on your WAN port. Contact your
ISP or system administrator for more information on appropriate settings.