Filter
Top Products
Maintaining Groups 111
ungroup
This command deletes a group. The LAN driver for the
group must not be loaded. The following message appears
for all frame types that the NIC supports:
Cleaning up resources for group associated with
Primary Slot #xxxx.
wait timeout
This command sets the timeout value, in seconds, that the
software waits before marking a NIC that is in wait mode
as failed (see retry count). If no argument is specified or
if the specified argument is invalid, the current value is
displayed. Otherwise, the new value is displayed.
Syntax
lbrsl send timeout pri_slot seconds
where:
pri_slot is the PCI slot number of the primary NIC.
seconds is the time in seconds.
Example
lbrsl send timeout 1001 10
Default 10
Syntax
lbrsl ungroup pri_slot
where:
pri_slot is the PCI slot number of the primary NIC.
Example
lbrsl ungroup 10001
Default None
Syntax
lbrsl wait timeout seconds
where:
seconds is any positive integer.
Example
lbrsl wait timeout 2
Default 1