Filter
Top Products
44 CHAPTER 3: INSTALLING NIC DRIVERS IN WINDOWS
4 Select the CD-ROM drive option and clear any other
check options that are selected.
5 Insert the EtherCD in the CD-ROM drive, and then
click Next.
Windows finds the driver file for the device.
6 Click Next.
Files are copied.
The Insert Disk screen appears, prompting you for the
Windows 98 CD-ROM.
7 Click OK.
The Copying Files dialog box appears.
8 Remove the EtherCD from the CD-ROM drive, insert
the Windows 98 CD, enter the path to the CD-ROM
drive, and click OK.
The Add New Hardware Wizard displays a message
informing you that Windows has finished installing the
software.
9 Click Finish.
The Systems Settings Change screen appears, prompting
you to restart your computer.
10 Click Yes to restart your computer.
The software installation is complete. Go to Verifying
Successful Installation on page 48 to confirm that the NIC
is properly installed.
Windows 95
This section describes how to install the network driver and
NIC software in a PC client or server running Windows 95.
You must restart your computer to complete the
installation.
CAUTION: Do not install a 3CR990 NIC while installing
Windows 95 OSR2 using the “Custom” option. Install
Windows 95 OSR2 first, then install the 3CR990 NIC
.